Prevención de la corrosión a bordo de los buques. Prevention of corrosion on board ships. Prévention de la corrosion à bord des navires | LIBROS NÁUTICOS | Organización Marítima Internacional (OMI / IMO) | Librería Náutica cartamar. Libros Náuticos. Cartas Náuticas | Libreria nautica Cartamar. Libros nauticos. Cartas nauticas.

Contenido:

Libro editado en español, inglés y francés

En los años 90, la Asamblea de la OMI pidió al Comité de Seguridad Marítima (MSC) que elaborara prescripciones para el proyecto, la construcción, el funcionamiento, el mantenimiento y el reconocimiento de graneleros, así como medidas de precaución específicas con respecto al tipo de carga. En consecuencia, se examinaron varias medidas, incluida la elaboración de normas de rendimiento de los revestimientos protectores.



Índice:

Introduction

RESOLUTION A.798(19)
Guidelines for the selection, application and maintenance of corrosion prevention systems of dedicated seawaters ballast tanks
1. General
2. Definitions
3. Coating
4. Cathodic protection
5. AAlternative methods
6. Maintenance

RESOLUTION MSC.215(82)
Perdprmance standard for protective coatings for dedicated seawaters ballast tanks in all types of ships and double-side skin spaces of bulk carriers
1. Purpose
2. Definitions
3. General principles
4. Coating standard
5. Coating system approval
6. Coating inspection requirements
7. Verification requirements
8. Alternative systems
Annex 1: Test procedures for coating qualification for dedicated seawaters ballast tank of all types of ships and double-side skin spaces of bulk carriers
1. Scope
2. Definitions
3. Testing
Appendix 1: Test on simulated ballast tank conditions
1. Test condition
2. Test results
3. Acceptance criteria
4. Test report
Appendix 2: Condensation chamber test
1. Test condition
2. Test results
3. Acceptance criteria
4. Test report
Annex 2: Example of daily log and non-conformity report
Annex 3: Dry film thickness measurements

RESOLUTION MSC.244(83)
Adoption of performance standard for protective coatings for void spaces on bulk carriers and oil tankers
1. Purpose
2. definitions
3. General principles
4. Coating standard
5. Coating system approval
6. Coating inspection requirements
7. Verification requirements
8. Alternative systems
Annex 1: Test procedure for coating qualification for void spaces of bulk carriers
1. Scpe
2. Definition
3. Test
Annex 2: Example of daily log and non-conformity report
Annex 3: Dry film thickness measurements

GUIDELINES FOR CORROSION PROTECTION OF PERMANENT MEANS OF ACCESS ARRANGEMENTS
1. Permanent means of access in dedicated seawaters ballast tanks in all types of ships and double-side skin spaces of bulk carriers
2. Permanent means of access in void spaces

GUIDELINES FOR MAINTENANCE AND REPAIR OF PROTECTIVE COATINGS
1. General
2. Application and defenitions
3. Survey recommendations
4. Coating conditions
5. Coating maintenance
6. Coating repairs
7. Coating Technical File (CTF)
8. References

APPENDIX
Good coating condition
Fair coating condition
Poor coating condition